D1 LED Moisture-proof Light-Intelligent,Safe and Efficient LED Industrial Lighting Specialist

Products

Contact Us

	Tel: 0086-755-2306 6948
	Fax: 0086-755-6164 1072
	Zip Code: 518125
	Email: info@DUALRAYS.com
	10th Floor \| Litong Semiconductor Industry Park \| Shapuwei Community ,Songgang Town,Bao‘an Dist \| Shenzhen 518103,Guangdong Province,RPC

D1 LED Triproof Light

< >

D1 LED Moisture-proof Light

Closed and non-dismountable light fitting acccording to the standard
ČSN EN 60598-1 part 4 suitable for indoor and outdoor space
(even without shelter), industrial, warehouse and agricultural buildings,
sports premises, transport terminals, parking lots and garages,

workshops and laboratories without explosion hazard.

The structural design of the light fitting (IP69) allows even placement
in food-processing industry - HACCP.

The light fitting resists dust, humidity and washing with spouting water
up to 80°C. The body and the diffuser made of PC material have high
mechanical resistance against impact and deformation.

An external terminal block makes it easy and quick to connect the
supply cable, Emissions in the environment of use may reduce the
usability of the plastics.

Options:

> Built-in motion sensor & emergency;

> Single wiring linkable;

> Multiple Installations: Suspension, Ceiling Mounting Optional;

> Various intelligent control: 1-10V, DALI, Motion sensor,Daylight sensor,Zigbee and Emergency;

> An External Terminal Block is Necessary to Makes It Easy and Quick to Connect the Supply Cable

> Replacement for fluorescent NCF;

> Workshops and warehouse;

> Garage and car parks;

> Sport facility;

> Corridor/Gallery/Corridor;

> Outdoor & Indoor Locations;

Length/mm Size A / mm Size B Size C Size D

600mm 2FT/600 624 78 82

1200mm 4FT/1200 1224 78 82

1500mm 5FT/1500 1524 78 82

General System

Housing Material Extruted PC according to the UNE-EN ISO 21305-1:2020 standard, UV filter conditional(IK10)

Diffuser Material Extruted PC according to the UNE-EN ISO 21305-1:2020 standard, UV filter conditional(IK10)

Housing Color White (RAL9016), Other colors optional

Sealing Gaskets Silicone foam

LEDs Thermal Dissipation Through finless 6063 AL luminaire body, without conductive fluids. Passive convection dissipation ensuring thermal contact with the LED modules through a high-conductivity Lead-free solder paste

Anti-condensation Pressure-balancing valve optional to ensure moisture release, avoid condensation and maintain the luminaire IP tightness

Finish Electrostatically sprayed and sublimated in the oven. Resistant to corrosion

Recommended Mounted Height 2 - 8 meters

Maintenance Non-dismountable or snap-in clips optional

Driver Constant current with optional power adjustable via DIP switch, embedded in luminaire, pre-wired

IK (Impact Resistance) IK10

Protective Class Class Ⅰ

IP (Ingress Protection Rating) IP65

Glow Wire 850°C

Installation Ceiling mounted | Suspension | Rotatable Wall Mounted

Cable Entry M20 cable gland

Smart Function PIR Sensor | Microwave Sensor | Emergency

Electrical System

Through-wiring 3*1.5mm2 | 5*1.5mm2 | 3*2.5mm2 | 5*2.5mm2 wires through for option

Main Voltage 220~240VAC/ 50/60Hz, 180-264VDC

Power Factor (PF) ≥0.96

Total Harmonic Distortion (THD) ＜10%

Output Type Non-SELV(non-isolated)

Flicker Factor ＜1%

Stroboscopic Visibility Measure (SVM) ＜0.4

Perceptibility of Stroboscopic Effects (Pst) ＜1

Terminal Connection Quick snap end-cap for easy installation, sliding gear tray for easy replacement and maintenance

Luminaires Power B10A B16A C10A C16A

20W 40 67 65 108

Module via LSS Circuit Breakers 30W 28 48 34 55

40W 33 54 56 90

50W 20 34 30 50

60W 20 32 34 54

Photometry System

LEDs SMD2835 (0.5W)

CCT (Correlated Color Temperature) Single CCT (3000K | 4000K | 5000K | 5700K |6500K)

CRI (Color Rendering Index) >80Ra for standard (>90Ra for higher CRI available)

Photobiological Safety RG0 (exempt of risk)

EEC (Energy Effciency Class) A++

SDCM (Standard Deviation of Color Matching) ＜5 (SDCM<3 Optional)

UGR (4H, 8H) 24.9 (Cross)

23.4 (Longitudinal)

Beam Angle 120°

Average Luminaire Useful Lifetime 50.000 hours (L80B10)

Lumen Maintenance at e.o.l. >70%

Luminous Efficacy 130LPW (PROLine) | 160LPW (PRIMELine) Optional

Length 2FT/600mm 4FT/1200mm 5FT/1500mm

Rated Power 22W DIP(10~22W) 42W DIP(20~42W) 62W DIP(30~62W)

Lumens Delivered @ 5000K, CRl>80 (PRO) Max. 2.860lm Max. 5.460lm Max. 8.060lm

(PRIME) Max. 3.520lm Max. 6.720lm Max. 9.920lm

Operation Condition

Operation Temperature / Humidity -20~ +60℃ (-4°F ~ 140°F) / 5~85% RH, not condensed

Storage Temperature / Humidity -40~ +80℃ (-40°F ~ 176°F) / 5~85% RH, not condensed

Average LED Useful Time L80B10 ≥100.000H

Rated Nominal Lifetime (Tp <70℃) Up to 100,000H

Driver MTBF 500.000H,MIL-HDBK-217F(25℃)

Vibration Resistant 10~500Hz,5G 12min / 1cycle,period for 72min. Each along X,Y,Z axes

Acoustic Noise ＜25dB (30cm disstance, Normal operation)

Guarantee 3 Years

Certifications

Security Directives EN 60598-1 | EN 60598-2-3 | EN 62493 | IEC 62471

EMC Directives EN 55015 | EN 61547 | EN 61000-3-2 | EN 61000-3-3 | EN 61347-2-13 | EN 61347-1 | EN 62384

Other Directives IEC 62262 | EN 13032-4 | EN 62717 | EN 6272-1 | EN6272-2-1 | EN 61643-11

* Luminous flux tolerance, Power tolerance and color temperature tolerance ±5%, 5000K and CRl>80.

* Lighting beam, light intensity distribution and light efficiency were examined in accordance with the EN ISO 17025:2005 norm for EN13032 norm series and the LM-79 norm.

* Up-to-date product info and general warranty terms available on our website www.DUALRAYS.com

* Detailed information on luminous fluxes and powers for individual indexes are indicated on the product data sheet.

* Values may be subject to change due to LED binning.

* The parameters in the data sheet are given for Ta=25°C, based on 4000K/80Ra, 10% efficiency higher with transparent diffuser.

Length/mm Inner Box Outer Carton QTY”/CTN Unit N.W G.W/Carton

600mm 660x90x85mm 675x285x280mm 9PCS 1.3Kg 12.8Kg

1200mm 1260x90x85mm 1275x285x280mm 9PCS 2.1Kg 20.1Kg

1500mm 1560x90x85m 1575x285x280mm 9PCS 2.6Kg 23.6Kg

Caution:

Please read all the instructions below before installation:

* To avoid electric shock, please ensure that the power supply is turned off before installation.

* The lamp should be installed and operated by a qualified electrician or technician in accordance with the National Electrical Code and corresponding local codes.

* Unpack and examine the lamp carefully, report any damage and save all packing materials if anyportion of the product was damaged during transportation.

* If the lamp is damaged, do not use it!

Statement:

According to the International Standard of LED luminaire, here DUALRAYS formally claims that DUALRAYS LED Tri-proof(Weather proof) series products is only allowed
to be applied to indoor or semi-outdoor neutral environment. Meanwhile DUALRAYS promises full warranty for the products.

Any severe environment application including high/low temperature, high humidity, high salinity, high-ammonia etc. is not permitted without the official confirmation from
the manufacturer. If any misapplication happens, the warranty policy is no longer guaranteed.

File Name :	Format:	Size:
DUALRAYS D1 LED Moisture-proof...	PDF	1.17 MB
DUALRAYS Nederland Warehouse 2...	PDF	1.05 MB
DUALRAYS LIGHTING Catalogue 20...	PDF	8.65 MB
XuYu SMD2835 LM-80 report 6000...	PDF	648.10 KB

Please submit your contact information to [email protected], Dualraysers will contact you within 24 hours!

Title: *

Contact: *

Tel: *

Company:

Website:

Email: *

Content:*

Home

About Us

Products

News

Service & Support

Solutions

Contact Us

Products

Products

Contact Us

D1 LED Triproof Light

D1 LED Moisture-proof Light

Related products

D1H LED Moisture-proof Light

TB6 LED Tubular Light

D3 LED Triproof Light

D5 LED Triproof Light

TB7 LED Tubular Light

D4 LED Damp-proof Light